www.veka.de
1,2,3 next>>
  
Corrugated sheets of solid
homogeneous PVC
Owing to a low weight, impact resistance and good weather resistance the material is widely used for outdoor applications: for sheds, roof windows, conservatories, greenhouses, building extensions, fences, as roofing and walls for industrial and agricultural buildings. Internal works: for transparent partition walls and decorative elements.

Technical specifications:
- density - 1,38 g/cm3
- expandability - 0,09 mm/m/°C
- operating temperature -30°C +65°C
- heat conduction (DIN 52612) - 0,15W/mK
- softening temperature and pressure effect
(DIN 53460) - 70°C 		 

 
 
DESCRIPTION
THICKNESS, MM
MINIMAL BENDING RADIUSS, M
SIZE, MM
W 70/18
1.2
2.5
2000 x 1090
W 76/18
1.2
2.5
2000 x 1030


 
Installation suggestions:

  • do not attempt install of the sheets at temperature under + 5°C.
  • sheets should be installed so that waves are perpendicular to the beams.
  • beams can be wooden or metal and they should be painted white (to reflect heat produced by sunlight)
  • the sheets are designed for single-layer application; do not lay the sheets on other transparent or mat materials.
  • fasten sheets through drilled holes with a diameter exceeding the diameter of screws by 4 - 5 mm to compensate expansion of sheets.
  • in roof installation, the sheets are fastened to the upper wave of the sheet, in wall installation – to the lower wave of the sheet


    Layout pattern

    		  

     
    Corrugation sheeting - roof install

    Longitudinal overlaps
    INCLINATION
    OVERLAP, MM
    12°
    250
    13°
    222
    14°
    207
    15°
    193
    16°
    181
    17°
    150
     
    Transverse overlap
    PROFILE
    INCLINATION
    LENGTH
    5 M
    LENGTH
    5-10 M
    LENGTH >
    10 M
    70/18
    5-12°
    2 corrug.
    2 corrug. +
    seal strip
    not recommended
    76/18
    12-20°
    1 corrug.
    2 corrug.
    not recommended
    .
    >20°
    1 corrug.
    2 corrug.
    not recommended
    130/30
    5-12°
    1 corrug.
    2 corrug. + seal strip
    2 corrug. +
    seal strip
    .
    12-20°
    1 corrug.
    1 corrug. +
    seal strip
    2 corrug. +
    seal strip
    .
    >20°
    1 corrug.
    1 corrug.
    1 corrug. +
    seal strip
      
     
    1,2,3 next>>
    Start | Materials | Services | Contacts